SUPU ID | 302901 |
Fita | 6.2mm ku |
Yawan matakan | 1 |
Yawan haɗi | 2P |
Hanyar haɗi | Haɗin dunƙulewa |
Matsayin Kariya | IP20 |
Yanayin aiki | -40 ~ + 105 ℃ |
An ƙididdigewa a halin yanzu | 24A |
Ƙimar Wutar Lantarki | 800V |
Ƙarfin wutar lantarki | Ⅲ |
Matsayin gurɓatawa | 3 |
Ƙarfin wutar lantarki mai ƙima | 8.0KV |
Sarrafa giciye sashi m | 0.2-4mm² |
Mai gudanarwa giciye sashin sassauƙa | 0.2-2.5mm² |
Sarrafa sashin giciye mai sassauƙa, tare da furrule | 0.2-2.5mm² |
Ƙaddamar da kulle dunƙule | M3 |
Rated Torque | 0.6 nm |
Tsawon cirewa | 7-8 mm |
Yi amfani da rukuni | B | C | D |
An ƙididdigewa a halin yanzu | 20 A | 20 A | |
Ƙimar Wutar Lantarki | 300V | 300V | |
Sashin giciye mai ƙima | 30-12AWG |
Abun rufewa | PA66 |
Rukunin kayan abu | Ⅰ |
Matsayin jinkirin harshen wuta, yarda da UL94 | V0 |
Kayan tuntuɓar | Copper gami |
Halayen saman | Sn, Plate |
Tashoshi masu hawa: Bayan sanya ƙafar tasha mara aiki a gefen titin dogo, danna wani gefen ƙafar motsi don kammala shigarwa.
Haɗa wayoyi na waje: Sake screws, sannan ku haɗa wayoyi waɗanda ke buƙatar haɗawa cikin ramukan mashigai masu dacewa, sannan a ɗaure sukurori don kammala haɗin wayoyi.
Ana amfani da samfuran a cikin lif, wutar lantarki, jigilar jirgin ƙasa, sarrafa kansa na masana'antu, sabon makamashi, hasken wuta, jiragen ruwa, kayan aiki, injina da kayan aiki da sauran filayen.